Request for Quotations, Download Here
Supply of a fully assembled Tractor and a disc plough
| Reference No.: | RQ7320 |
| Date Published: | 03/20/2025 |
| Due Date for Responses: | 05/23/2025 |
Requirements
Introduction:
Techno Serve is an international nonprofit organization that promotes business solutions for poverty in developing countries. It is headquartered in Washington, DC, and operates in 29 countries worldwide. TechnoServe’s mission is to work with enterprising men and women in the developing world to build competitive farms, businesses, and industries. It does this by linking people to information, capital, and markets.
TechnoServe Uganda, in partnership with Wageningen University and Research (WUR), Bid Capital Partners, and PUM Netherlands, is implementing the Horticulture Market Acceleration Project (HortiMAP) in 33 districts spread across three Ugandan regions: Elgon region, Kigezi region, and the Lake Victoria crescent. The project aims to catalyse SMEs to deliver unique solutions in the form of products, services, and opportunities that solve crucial constraints faced by smallholder and entrepreneurial farmers involved in the sector with a focus on 12 horticulture value chains: Tomato, Pepper, Eggplants, Cabbage, Watermelon, Pineapple, Passion Fruit, Mango, Avocado, Okra, Carrots and Onions. Over the last four years, the project has supported farmers to increase production and access to services to support business growth but recognizes the need to organize the farmers to contribute to building a resilient sector. Through an infrastructure grant or a matching grant arrangements, TechnoServe would like to identify a competent company to supply on of its beneficiary in Mbale District in Eastern Uganda with a tractor and fdisc plough.
TechnoServe therefore invite competent a competent firm to submit their quotation for the items detailed below;
S/n Item Description
- Tractor (75-85hp)- 4WD
2Disc Plough (3 disc)
- Delivery to Mbale
Qty Remarks
- For agriculture operations
- For agriculture operations
The tractor & disc plough shall be delivered to Mbale district
Tractor Specifications:
Engine: –
Diesel, 3-4 cylinders in line with replaceable cylinder sleeves developing
Machine power (75- 85) HP at the rated speed of 2,000-2,500 rpm.
Air cleaner: –
Efficient, heavy duty type consisting of two parts: –
Pre-cleaner, followed by: Main air filter, dry or oil bath type.
Fuel system: Consisting of: –
Metallic fuel tanks of minimum capacity 60 liters, fitted with Strainer in the fuel filling opening.
Manual operated fuel lift pump.
Twin or dual stage fuel filter with replaceable elements.
Fuel injection pump with mechanical or pneumatic governor.
Lubrication system: Composed of: –
High capacity force – feed lubrication pump of gear, piston or rotary type (gear type) equipped with oil strainer.
Efficient oil filter with a by-pass valve and replaceable element.
Cooling system: –
Water-cooled system suitable for continuous operation under hot tropical climate (where ambient temperature may reach – 500c).
The system consists of: – Centrifugal type water pump, High capacity cooler radiator, High capacity fan, Thermostat.
Electrical equipment:
Heavy-duty battery 12 volts, 90-100 amps hour.
Electrical starting system.
Electric generator (alternator).
Voltage regulator.
Instrument panel: –
Temperature gauge.
Oil pressure gauge.
Fuel level indicator.
Battery charger indicator.
Tachometer (rpm).
Speedometer (km/hr).
Hour meter.
Air cleaner blockage indicator.
Horn.
Lighting system: –
Head and rear lights.
Brakes and direction indicator lights.
Rear tractor warning lights.
Rear field flood lights.
Pin type trailer socket.
N.B. All electrical circuits to be protected by individual fuses.
Transmission: –
Clutch: Dual or single dry clutch plate or multi disc wet type.
Gearbox: Synchronized constant mesh or sliding spur. Manual change with high and low ratio combination to provide minimum 8 forward and 2 reverse speeds.
Differential lock: Engage when necessary.
Hydraulic system: – Consisting of: –
Gear or piston type pump with pressure range 140-175 kg/cm2 and minimum lift
Capacity of 1500 kg.
Automatic draft and position control independent of implement weight or length.
Three points linkage of category II with adjustable upper arm, right lift arm and check
Chains. Check chains to be of high quality steel.
External service valve for both single and double acting cylinders with sealed coupling
Steering:-
Hydrostatic or manual with turning radius 2.5-3.5 meters.
Draw bar:-
High quality steel swinging type with adjustable height.
Minimum ground clearance 300-350 mm.
Wheels and tyres:-
Steel disc wheel
Tube tyres from rubber, heavy duty type.
Type of regular agricultural tread
Other requirements:-
Comfortable seat with back rest and position adjustment.
Front weights and rear wheel weights.
Tool box fixed to the tractor with the following contents:- 3 ton hydraulic jack, Grease gun, Foot operated air pump, or tractor operated air compressor, pair of pliers ( grip type and standard), Set of open ended spanners to fit all tractor nuts and bolts, Wheel spanner to fit front and rear wheel nuts, Sun shade with protection frame.
Technical documentations: Operation and service manual (English), Workshop manual , Parts list catalogue.
Country of origin, Year of manufacturing, Tractor power (Hp & KW), Make and model.
Delivery Instructions
Delivery Location: Mbale city, Eastern region, Uganda.
Transport: Transporting the tractor and the disc plough to the delivery location is the responsibility of the supplier and the delivery fee must be included in the quotation.
Registration: The tractor must come when it is already registered (with registration number plates).
Transfer of ownership: The transfer of title of ownership to the beneficiary name is the responsibility of the supplier. The cost must be inclusive of all transfer realted fees.
Training: The supplier must conduct user training to the beneficiary upon delivery
Assembling: The tractor and plough must be delivered when it has been fully assembled and services. The equipment should be in operational state/ready to use.
Requested Delivery Date
04/10/2025
Additional Information
Documents
Share your quotation and provide the following as well;
If the bidder does not manufacture or produce the required goods, the bidder shall submit the Manufacturer’s Authorization to demonstrate that it has been duly authorized by the manufacturer or producer of the Goods to supply these goods in Uganda,
Past supply information- At least 3 reference/completion letters from reputable organizations with the supply of the same machine preferably in Uganda.
Description of Item, specifications, source country, brand, etc
Availability of Service centres and spare parts,
Warranty and After-Sales Requirements,
Payment terms
Administrative Requirements
The quote must include the following administrative documents at a minimum.
Company Registration Documents
Valid trading licenses,
Tax registration certificate,
Valid Tax Clearance Certificate issued by URA addressed to TechnoServe.
Response Instructions
To ensure consideration, all responses must be submitted no later than 05/23/2025, written in English with prices stated in UGX. Download Here
All responses must:
Contain a detailed cost with applicable taxes and other charges clearly identified.
Provide requested payment terms and conditions.
Include a contact name, email address, and telephone number.